Monday, 6 October 2014

14th Continental Regiment

This regiment is also known under its nicknames "Glover's Regiment" or "Marblehead regiment" (originally Marblehead Militia), after its commander John Glover respectively their hometown. It consisted almost entirely of seafaring men from the area around Marblehead in Massachusetts.
The regiment was also known as the "amphibious regiment", as they manned the boats during the New York and New Jersey campaigns of 1776.
The regiment was almost entirely composed of fishermen and sailors from Marblehead, among them many coloured men. At first General Washington was not in favour of this fact. He preferred all-white regiments. However, as things went wrong in the Battle of Long Island in August 1776, he depended on the vital nautical skills of the Marbleheaders: Glover's Marblehead men evacuated Washington's army to Manhattan in a nighttime operation, saving them from being entrapped and taken prisoner. In the following New York campaign the regiment fought well against the British with courage and stamina.
The last action of the regiment was its most famous: ferrying Washington's army across the Delaware in a snow-storm for a surprise attack on the three regiments of the Hessian garrison at Trenton in December 1776. The regiment was disbanded as enlistments expired at year's end.
The uniform "consisted of a  blue round jacket and trousers, trimmed with leather buttons; and Colonel Glover was the most finely dressed officer of the army at Cambridge." (Lossing). Other sources suggest a brown coat faced red. But no one really knows if there really was anything like a uniform in 1775 and 1776. A "nautical" look seems most appropriate. That means short jackets, wide slops or trousers, caps, narrow brimmed hats etc.
Marbleheaders
Figures for this unit in typical nautical outfit can be found with Eureka Miniatures (1 officer, 1ensign, 1 drummer, and 4 rank and file types), and with FistoriFigs Miniatures (1 officer, 7 Marbleheaders, and 2 sailors). Other figures in trousers can also be used, I think.
Eureka Marbleheader command with naval flag
Eureka Marbleheader figures
Eureka figures
Perry figures in trousers painted as Marbleheaders
HistoriFig Marbleheaders and 2 sailors
 

Sunday, 24 August 2014

Armed Civilians

Remembering the last game of our group I wanted to add some armed civilians defending their homesteads to our range of figures. I ordered the settlers defending packages from Galloping Major, and combined them with the  "Civilians Defending Homestead" and "Standing Firing" sets by Redoubt Enterprises. The old-fashioned clothing of the figures is acceptable, I think, as civilians in the country didn't alter their fashions as fast as citizens in the cities. And what are 50 years in a period when sons usually inherited the clothes of their fathers? The 18th century didn't know the throw-away mentality of our days, after all.

The parson, set in front of his church door
(the church has yet to be built)
Painting the figures was great fun, especially the characters of the sets. I do like the parson with his Bible and pistol, and the shopkeeper with his blunderbus.
The shop-keeper in font of the store building (seems to be Mr. Prentis in person)
Here are some photos.
Settlers defending 3 (Galloping Major)
Settlers defending 1 (Galloping Major)

Settlers defending 2 (Galloping Major)
Civilians defending homestead and firing (Redoubt)
 
Civilians defending homestead and firing (Redoubt)
Soldiers free figures by Galloping Major (Galloping Major)


Saturday, 23 August 2014

Grenadier Company 74th Regiment of Foot

The 74th (Highland) Regiment of Foot was a line infantry regiment especially raised to fight in the American War of Revolution.
In December 1777, John Campbell of Barbreck received letters from the King to raise a regiment of infantry in the county of Argyll for service in the regular army. Campbell was a veteran of the old 78th, or Fraser Highlanders, of The French and Indian War. The regiment was complete in May 1778, and sailed for Halifax, Nova Scotia, in August 1778.
The regiment's grenadier and light infantry companies joined the main British army in New York in the spring of 1779, while the remainder of the regiment moved to Bagaduce in Massachusetts.
The grenadier and light companies served with General Clinton in South Carolina in 1779 and 1780.
The uniform of the grenadiers was the usual red coats of the highland regiments, faced yellow with silver (officers) and white lace (rank and file). The buttons were of silver and pewter. They wore the usual fur caps with black and silver front plates. A matter of discussion is their tartan. Most think that they used the Government tartan like the Black Watch (42nd), others suggest that it was the Forbes tartan, which was similar, the only difference being a white (greyish) stripe in the centre of the green stripes.
Forbes tartan
I decided to paint the Forbes tartan - for a difference.
The grenadier company in ranks
Senn from behind
The figures are Highland grenadiers of the FIW range by Redoubt Enterprises. I don't mind their somewhat dwarfish proportions, which allow more physiognomical characteristics, their heads being more the size of 40mm figures. However, their uniforms are a bit old-fashioned. But they show the traditional Highland equipment, which was typical for this regiment. I tried to modernize their uniform jackets with paint, which was the least troublesome method, and sufficient for the game table, I think.
Unfortunately I couldn't find a Highland piper with a grenadier cap. So the company consists of an officer, a drummer, a sergeant (converted ensign), and six grenadiers. They are singly based on washers. So I can arrange them on a bit of magnetic foil, either in column, or in two ranks, as needed.

The company marching
Another view

Friday, 1 August 2014

Conestoga Wagon

Conestoga wagon (1883), painting by Newbold Hough Trotter
Pennsylvania State Museum (photograph Ad Meskens)
After I had bought the so-called "Conestoga Wagon" from Perry Miniatures (AW 192) I started to investigate in the Internet about this vehicle.
Historical photo of a Conestoga wagon with team of six horses and the wagoner (1910).
First of all I learned that a Conestoga Wagon was not just a "covered wagon" and not at all identical with the "prairie schooner" of the 19th century - it was, indeed, a heavy overland cargo vehicle that originated around 1754, and was probably introduced by Mennonite German settlers in the Conestoga Valley in Pennsylvania. The wagon was conceived for transporting heavy loads in hilly or even mountanious regions. For this purpose the vehicle was cleverly built: Its floor curved boat-like upwards at the front and rear ends to prevent the load from shifting when travelling up or down hill. It had a tailgate for loading. The construction was stout to withstand the stony and bad roads, actually it was a heavy vehicle with lots of iron reinforcements, normally pulled by two to three pairs of horses. The wheels were large so the wagon could pass over streams without getting the products inside wet. Furthermore the wagon could pass over stumps in the roads or large rocks, because roads were poor in those days.
The traditional colouring was a light but brillant blue verging on peacock blue for the body, vermillion red for the wheels and undercarriage, and white for the top made of canvas, sailcloth, or homespun hemp . All iron work was painted black.

Historical Conestoga Wagon at a museum display (with brake lever pointing forward).
The Conestoga Horses were a special breed of originally black draft horses, perhaps the offspring of the black cart horses common in England. They were massively built, weighed about 1800 pounds and stood between sixteen and seventeen hands at the withers (about 170 centimetres). They had no long hair beneath the fetlocks (the roads were often muddy!), and no long tails (to avoid matting).
Earliest drawing of a Connestoga horse.
The wagoner drove the team with a sigle rein, the "jerk line", running to the lead horse (the first on the left). A right turn would be signalled to the horses by giving several short jerks of the line and shouting "Gee!", a left turn by a steady pull on the line and calling "Haw!". The teamster either walked along-side the wagon, or he rode on the wheel-horse (the horse on the left side directly in front of the wagon), or he could pull out the "lazy board" which was fastened beneath the wagon bed beweeen the wheels on the left side, and sit on it. But then he was in danger of being regarded a lazy wagoner!
A historical photo, the wagoner riding the wheel horse, and his assistant sitting on the lazy board.
From this position he or his assistant could also work the brakes on the rear wheels by pulling the brake lever you can recognize at the left side of the wagon. At this period the Conestoga wagon was the only vehicle with brakes! On long slopes a brake chain could be applied which then barred the rear wheels.
One problem seems to be that in some pictures the brake lever points forward, in others backward. But if you have a look at the construction of the brake this is no real problem: The wagoner could fix the lever to the brake rocker bar either way, and operate the brake either from the lazy board or from the rear of the wagon (if he had an assistant).
Brake mechanism seen from above.
Brake lever worked from the rear of the wagon.

Brake lever worked from the side of the wagon.
Each horse wore an arch on its hame to which a number of bells were fastened. The lead team had five bells, the middle team four, and the rear team three bells. These bells annonced that the heavy transport was coming, and that people and lifestock had better get out of the way. However, bells were not always used on long distance travel, e.g. on the National Road connecting Baltimore and Frederic Maryland with Wheeling West Virginia.
The wagon carried some equipment: a feed box to feed the horses (fastened to the rear), a bucket to water the animals, an axe to clear the road in case any newly fallen trees blocked it, a grease bucket to grease the wheels, a jack for removing the wheels, and a tool box for small repairs.
Conestoga wagon in the Smithonian National Museum of American History (with brake lever pointing backward).
Having a look at my Perry model, I realized that it actually has some flaws, only some of which I could repair. It must be said, however, that re-measuring prompted that the wagon had the right size  - the average original wagon measuring 18 ft. long, 11 ft. high, and 4 ft. wide. However the bottom of the wagon body is not curved (see the exhibit at the Smithonian National Museum). So the general impression of the vehicle is not quite correct. This can't be remedied.
And then I realized that the brake on the right side was broken off, and the part not contained in the parcel. It took me some filing and scratching to produce a new brake from a bit of plastic sprew I had fortunately kept in my material box.
Adding the lazy board cut of balsa wood didn't prove too difficult. The brake lever took some more pains. I constructed it from brass wire by adding some material by welding.
Wagon model with the added parts.

The brake lever under construction.
Both parts could easily have been included in the original box, I think (I must admit that I prefer real models to play-things).
The horses of the model are not equipped with bells. Couldn't the producer have added these parts as well? Thast would have saved me some pains. However, being the perfectionist that I am, I made four sets of 3 and 4 bells on arches from grey stuff and thin wire and glued them to the hames. They are a bit out of proportion, but the idea is there.
Draft-horse with bells added (not yet completely painted).
The finished model does not look too bad, after all. And who knows all the details (I didn't myself before I started researching).
The missing buckets I bought from a ship-building model shop. They turned out to be a bit small, at least the water bucket. Perhaps I will change it later for a bigger specimen. The axe will be added later when I have been able to procure one. But that isn't absolutely necessary, as it was fastened to the the hounds and is hardly visible.
"I'll be there with bells on!"




Thursday, 10 July 2014

All hands on board!

Let me begin with my newest ship. It is the "Sea Dog" by Games of War which I converted into a privateer vessel by adding a quarter-deck, some windows, additional portholes, a steering wheel, anchors, and four swivel guns of different calibre. The flag on the mast can be exchanged.
As the flag shows this is an American privateer (the cannons are still missing)
The master is a sailor figure I got from Galloping Major when I bought the "Merchantman". I think this bully of a sailor gives the right impression of a privateer captain of the time. The man at the wheel is a Redoubt pirate figure.


Master and helmsman on the quarter-deck
My other crew members are a mixture of figures. Over the months I have collected various figures of seamen. Most are Napoleonic, though. But that doesn't matter too much as regards simple sailors. Only true top hats are an anachronism, as far as I know. And if you do not  take historical accuracy too serious, quite a lot of seamen will go unnoticed on board the ships, who really belong to the period after 1789.
Here is a review:
  • Brigade Games: British Napoleonic Navy (BG-NBR 022, 030-034), French Napoleonic sailors (BG-NFR 140, 141); Pirates (BG-BPP 008 etc.). Well sculpted types of seamen.
British seamen: 2 Midshipmen, boaring party I, gun crew of 4
British Navy Command figures

French sailors

Pirate gun crew
  •  Britannia Miniatures: Napeleonic gun crews and officers. The simple sailors are quite pittoresque characters (RIC 1-6; BTC 1-11).
Gun crews
Command figures: Master, gun commander, bosun, lieutenant, sailing master
  • HistoriFigs: They have a number of Marbleheaders and two sailors of the AWI period (HFG-014 - 017; TA-001 - 006).
    Marbleheaders and two AWI sailors
  • Newline Designs: British and French Napoleonic sailors, mostly gun crews and boarders (NN01 - NN58); the able bodied seamen are quite suitable for our period.
    Some examples, a French captain on the right 
  • Redoubt Enterprises: There are rowers and a tillerman with tricorn hat with their landing barges sets (FIX 6 and FIX 7), and of course lots of pirates that are suitable for 18th century sailors (BC 22...).
The man at the tiller and with the boat-hook are Redoubt sculpts (the rowers are by Brigade Games)

Rowers by Redoubt man my British gun-boat

Some pirates by Redoubt

Another Redoubt pirate at the bow

  •  Steve Barber Models: Some Britsh sailors (NN1-10), and some French counterparts (NN 31-35); the officers are definitely Napoleonic.
British sailors (and a converted "Admiral Nelson")

French seamen: Captain, lieutenant, and 3 sailors

  • War Modelling Miniatures: Sailors (NAV0015, NAV0016) and officers (e.g. NAV0001, NAV0003, NAV0006).
    2 captains, a lieutenant, and 2 climbing sailors
Most of the top hats could easily be transformed to round hats by filing. I left them as they are, not bothering too much about historical accuracy, and not wanting to "destroy" the beautiful figures..